DAQ

YILDIRIM DIGITAL .NET Library Published!

Posted on

YILDIRIM DIGITAL .NET Library Published! Hello there V1.0.0 of the library developed for using Yildirim Digital in Visual Studio has been released! Here you can easily reach the link. There are all the functions you need to use Lightning Digital in the library. With this library, more than 15 million I / O writing, reading […]

Temperature

TCMFC – Two Channel MFC Controller – Demo Video

Posted on

The test videos for the TCMFC LabVIEW application are below. You can post your questions in the comments. MFC (Mass Flow Controller GFC) are devices that control the flow rate of gases. AALBORG MFC is a preferred MFC product in Turkey. With this product’s LabVIEW-compatible Kies TCMFC card, two MFCs can be controlled in one […]

Circuit

ICT, AOI Comparison ICT vs AOI #3

Posted on

First of all, if we need to explain the concepts of ICT and AOI; ICT: In-Circuit Component Tester / On-Circuit Component Test System performs electrical testing of work-up, soldering and PCB paths, measuring the value of the materials on electronic cards after installation. AOI: Aoutomated Optical Inspection / Takes photos of PCBs after sorting and […]

Circuit

ICT, FCT Comparison ICT vs FTC #2

Posted on

First of all, if we need to explain the concepts of ICT and FTC; ICT: In-Circuit Component Tester / On-Circuit Component Test System performs electrical testing of work-up, soldering and PCB paths, measuring the value of the materials on electronic cards after installation. FCT: Function Test / Function Test tests the various function blocks on […]

Circuit

ICT – In Circuit Component Tester System #1

Posted on

ICT – In – Circuit Component Control Panel. This test is serial production. ICT time savings and alternative solutions produce more reliable results than AOI. This is why preferred producers control ICT on the sorting lines. Kies is an indigenous and original design of ICT. In addition, it is a system that can be operated […]

Circuit

What is Circuit Maker?

Posted on

Circuit Maker is a free circuit drawing program from Altium. Commercial and open source programs have both new and very different innovations. Circuit Maker is a bundled development environment from the hardware perspective. It would not be wrong to say github of electronic equipment. Circuit Maker has no limitations. Your circuits are pad, size etc. […]

Circuit

What is KiCad? Why should I use it?

Posted on

KiCad open source, free EDA program. What does it do? With KiCad you can do circuit design and PCB drawing professionally. It is also used by institutions such as KiCad Cern, which make a worldwide appeal. Free formation is a very successful and powerful program even if it creates “poor quality” image on people. With KiCad you can […]

Circuit

STM32F070CBT6 – Disco Board

Posted on

Features STM32F070CBT6 32-bit, 48 MHz, 128 Kb Flash, 16 Kb SRAM Programming via SW USB B connection UEXT port 4 buttons for user tests, 2 leds 4 pin analog input Open source KiCad project What can be done? USB applications IOT applications M2M applications Analog reading and filtering applications Various university, hobby projects All project […]